Auer Lighting manufactures refractive and reflective LED optics made of glass. Rely on the advantages of our glass-made optics: temperature and UV resistance, stability and a long service life. Innovative free-form surfaces perfectly highlight the diodes’ optical properties. Auer Lighting’s design suggestions also incorporate best-fit reflector solutions with extremely durable coatings and high-quality materials. The result: outstanding guidance of light and innovative designs combined into a long-lasting lighting experience.
CSEM is a private nonprofit Swiss organization for research and innovation. Supported by the Swiss Confederation, our mission is to enhance the competitiveness of industry by developing new technology platforms and transferring it to the industrial sector.
Our operation is based on five strategic programs:
Microsystems (Design & process Integration & packaging)
Systems (Scientific instrumentation, Medical device technology, Automation)
Photovoltaics & Energy Management (Crystalline Silicon & metallization , Modules & System integration, Thin film coating & devices, Printable photovoltaics, Energy Management)
Ultra-Low-Power Integrated Systems (System-on-chips, Wireless, Vision)
Surface Engineering (Nanotechnology, biotechnology, printable electronics)
In each of the above, we have gained a reputable standing on the national and international levels by offering our customers and industry partners custom-made, innovative solutions supported by our extensive market knowledge and technology expertise. CSEM plays a key role in the innovation value chain, by relying on public–private partnerships and narrowing the gap between fundamental research and industrialization. The support we get from the Swiss Confederation provides CSEM with greater flexibility in addressing a broad spectrum of technology research areas, which strengthens our commitment to innovation and sustainability and puts us in a better position to address future social and environmental challenges. By expanding CSEM’s knowledge and adapting it to industrial needs, new products are brought to market and new ventures are created. CSEM works with a wide range of stakeholders, from startups to SMEs and large organizations. Our services include contract R&D, strategy and innovation consultancy, development of specific business solutions for several Industrial Sectors (Space & Scientific Instrumentation, Watchmaking, Health & Lifestyle, Communication & Semiconductor, Energy & Environment, Automation & Control, Aeronautics, Transport & Security).
IMOS Gubela GmbH is a manufacturer of optical elements based in southern Germany. It is specialised in the development and production of LED optics and micro-optic structures. The optics are supplied to various renowned industrial customers and research institutions around the world. The company combines all core competencies in the field of optics – from product development by IMOS physicists, computer simulation andtoolmaking to prototyping and series production – under one roof. The product range offers a great variety of optical lenses for LED lighting technology, for high-power spotlights and flood lights, diffractive optics and light distribution structures. These products are used for backlighting and the generation of uniform light. In addition, IMOS specialists develop custom-made optical assemblies and work as a research institute for their customers from industry and science.
Hightech am Tiroler Lech – High End Optics Made in Tyrol
kdg. This is 30 years of experience in high precision optical injection moulding in the heart of the lighting Lechtal/Tyrol. Initially starting with CD to finally arriving with our youngest division, kdg opticomp, in the third dimension, manufacturing high precision optical components for all kind of LED applications techniques with a particular focus on the replication of micro and nanostructures on planar and curved surfaces. As kdg opticomp we don’t just offer tailor-made optics, we also serve our customers with well-established expertise in both thermoplastics and project management. And this is precisely how you should experience our offering: compact, resounding and brilliant together – simply kdg.
Our core business are definitely customised optics: from optic concept, to realisation of the prototype, to its serial production. But production-oriented optic design is only one thing. In order that you really have something to celebrate at the end of the optical design development process, the real essentials – i.e. design, tool-making, injection moulding and engineering must be perfectly coordinated from the outset by an experienced project manager. This is exactly where kdg opticomp comes in.
In short kdg opticomp doesn’t just convey a grounded expertise in high-end manufacturing. What really sets us apart is our start-up spirit and our perception of ourselves as creative innovators with the aim of continuously combining the tried-and-tested with the new.
– Free-form lenses and reflectors, optical fibres, diffraction gratings
– Customised optics for medical and sensor technology, general and technical lighting
– Production-oriented optical design
– In-house tool design
– Cost-optimised tool manufacture for injection and compression moulding with high-end hand polishing or ultra-precision processing
– The shortest cycle times by parallelization of production steps
– Mould-flow analyses to determine realistic tolerances
– Prototyping and measurement
LightCube is a UNIPD spin-off active in the research, development and design of LED lighting systems. LightCube is specialized in the electronic, optical and spectral development of innovative LED solutions and IoT systems. In electronics, the skills lie in the development of: microcontroller electronics for advanced control of LED systems, power LED drivers, sensors, Wired and wireless communication systems. In optics, the development of custom lenses and reflectors for complex optical tasks: from street lighting to surgical lights. In the thermal field, the design of advanced thermal solutions for reliability, performance and energy efficiency. LightCube’s activity is also focused on the development of Human Centric Lighting solutions, these systems interact with biology and human psyche to improve health, reduce stress, and balance the circadian sleep / wake rhythm.
OPTIS is the world leading software editor for the advanced scientific simulation and visualization of lighting, materials and human vision within a Virtual Reality environment. Its solutions allow designers, ergonomists and engineers to simulate and optimize lighting performance, product appearance, perceived quality and visual brand identity and meet regulation, in a fully-immersive environment.
OPTIS CAD embedded solutions are fully integrated into your design process. OPTIS 3D High End Simulations allow you to experience your future product in a virtual reality center using a physics based approach that ensures safety and quality and enhance visual signature of your products. With these tools, simply enjoy working in a collaborative environment at any stage of your product life cycle, from design to engineering, to marketing. Optimize the development time and cost thanks to the OPTIS’ flexible and efficient software tool set.
OPTIS makes it possible to simulate the spectral radiation of the source which will illuminate the colored object. Depending on its color, the object will return only part of the light and it’s this light/object combination that results in the final color of the product. It’s precisely this phenomenon that we reproduce in our solutions, and the reason why we can say that the results you get with our software are “physically correct”. OPTIS software is the only approach to date that guarantee the ultra-realistic color of an object.
– Luminaires development and optimisation by means of optomechanical simulation
– Development of backlighting systems for display applications and hollow wave guides
– Spectroscopic analysis of lighting sources
Stumpe Glas is a glass refining company specialized in developing and manufacturing high precision glass components for any thinkable industry worldwide. Besides the broad range of standard products, we focus on customized solutions for your individual application.
VIAOPTIC is a leading supplier of customized plastic optical components and injection molding tools. With our motivated employees and our modern infrastructure in the optic city Wetzlar (Germany). We are optimally equipped to react to customer requirements in development, tool design, injection molding, surface coating and assembly of customized LED-Modules.
Vossloh-Schwabe is part of the Panasonic Lighting Europe. As a producer and supplier of an extensive standard product range in the field of LED technology (LED, SMD, COB) as well as LED-electronic and LED-optic Vossloh-Schwabe is understood primarily as a service provider in the field of LED lighting technology. In addition, we offer support in search for individual solutions for LED application, optimized for each of your requests. To complete the offer, the entire product range and expertise of the group is used to thereby meet the following performance expectation: „everything from one source“. The cooperation with renowned partners, the technological head start in the sector of the COB-production and the strong customer focus guarantee innovative products.